Want this question answered?
yes... this is possible if a diode i connected in reverse bias with a battery and a resistor for example. A diode in reverse bias means its anode will be connected to positive terminal of the battery and its cathode to the negative terminal of the battery. In such a case, minimal current flows through the circuit which can be neglected.
Connect a VOM to one winding. Momentarily connect a battery to the other winding. When the battery makes contact, a pulse will occur on the other winding. If the pulse is positive, then the terminal connected to the plus lead is in phase with the lead connected to the battery.
in reverse bais negative terminal of battery is connected to p section and positive terminal to n section that arrangement is called reverse bais.Answer given by Sehdev Kumar B.Teh. 1st year
The term, 'negative ground' or 'negative earth' refers to the system of chassis-grounding, or chassis-earthing, used in vehicles. With this system, the negative terminal of the battery is directly connected to the metal parts of a vehicle, while the positive terminal is connected to the various electrical devices (lamps, etc.) using insulated conductors. The vehicle's metal parts ('chassis') then act as the return conductor to the battery.
The third terminal is a communication between the battery electronics and the mobile phone, it is like a one wire communication to tell the mobile phone the state of the battery etc.
Center terminal is connected to the positive from the battery. Outside is connected to ground (-).
Note: When interconnecting A200 batteries (cells), they must be identical in voltage and amp rating! Batteries may be connected in series. The positive terminal of the first battery is connected to the negative terminal of the second battery; the positive terminal of the second is connected to the negative of the third, and so on. The voltage of the assembled battery is the sum of the individual batteries. The batteries are connected: + to - to + to - to + to -, etc. The capacity of the battery is unchanged. Batteries may also be connected in parallel. The positive terminal of the first battery is connected to the positive terminal of the second battery, the positive terminal of the second is connected to the positive of the third; the negative terminal of the first battery is connected to the negative terminal of the second battery, the negative terminal of the second is connected to the negative of the third and so on. The batteries are connected: + to + to + and - to - to -. In this configuration, the capacity is the sum of the individual batteries and voltage is unchanged.
The positive terminal of the battery would be connected to the positive terminal of the ammeter. The load would then be connected between the two negative terminals, positive side of the load being connected to the negative side of the ammeter.
You cross the battery.
I can if I charge 2 of them at a time. Most 24 volt chargers also have a 12 volt setting. What is hard to find is a 32 volt charger. We can charge a 12V battery with 24V charger, by connecting two 12V batteries in series i. e. the negative terminal of the first battery is connected to the positive terminal of the second, now the charger positive terminal is connected to the first battery positive terminal and the negative terminal of the charger is connected to the negative terminal of the second battery.
The negative battery lead cable is to be connected to the negative lead terminal on the battery.
Yes
The negative battery terminal is marked with an minus (-) sign on the battery next to the post. It is the one with the black cable connected to it.
A terminal potential difference is the potential difference appearing across the terminals of a voltage source, such as a battery or a generator, which varies according to the load supplied.When the battery or generator is off load (i.e. no load is connected to it), the terminal potential difference is equal to the electromotive force of that battery or generator.The terminal potential difference tends to decrease as the load current increases, due to a corresponding increase in the internal voltage drop of the battery or generator.
when the positive terminal of the battery is connected to the positive terminal of the diode it is said to be in forward bias
By forcing electrodes through the positive terminal of the battery which becomes the anode in the recharge process of a battery
when the positive terminal of the battery is connected to the positive terminal of the diode it is said to be in forward bias