0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Whats the name of the thing that holds the pulley and pulley bolt on a 95 Mitsubishi eclipse?
Belt tensioner? Idler pulley?
How do you install an alternator belt on a 95 Grand Am?
Loosen the tensioner pulley. Put the belt around the alternator pulley and the tensioner pulley. Move the tensioner pulley to the right until the belt is tight. Tighten the tensioner pulley.
How do you tighten an alternator belt on a 95 Ford Taurus?
You have to install a new belt tensioner.
How do you change the serpentine belt on a 1995 Buick Park Avenue?
Loosen the tension on the 95 Buick Park Ave belt by moving the belt tensioner to one side. Using a socket and ratchet on the tensioner pulley, pull to the side an remove the belt. Install the new belt an release the tensioner to hold the belt into place.
How do you remove a belt tensioner on a 95 3.1 beretta?
Bstuff.com should have the info you are looking for.
How do you put a serpentine belt on your 95 cavalier?
Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install * To replace the belt rotate the tensioner pulley clockwise to release belt tension * Remove the belt from the auxiliary components and slowly release the tensioner * Route the new belt over the various pulleys again rotating the tensioner to allow the belt to be installed then release the belt tensioner
How do you remove the timing belt on a 95 cavalier?
The 95 Cavalier with the 2.2L engine does not use a belt, instead it has a roller chain/tensioner setup which should last the life of the engine.
How do you change the belt for a 95 mark 8?
wit a 1/2 wrench, put it in the tensioner
Will the computer from a 96 Mitsubishi eclipse work in a 95 Mitsubishi eclipse?
no
Where is the serpentine belt adjuster located on a 95 Chevy Lumina?
On vehicles with a single serpentine belt, tension is usually self-adjusted automatically via a spring loaded tensioner. No additional adjustment is necessary. If the belt is slipping or loose, then it needs replacing. Also check the tensioner bearings and replace the tensioner if necessary.
How much does it cost at a dealer to replace the timing belt on a 2000 Mitsubishi V6 Eclipse?
for a 95 eclipse it cost $399 parts and labor.
How do you tighten the fan belt in 95 Chevy S-10?
You don't "tighten" the belt, it's self adjusting. If the belt is slipping you probably have a problem with the tensioner spring. Occasionally the spring weakens over time. Pull the tensioner and replace it if you think it's loose.
