0
Add your answer:
Earn +20 pts
Why windows has stopped your fusb200 and shows error cod43?
I assume you mean "Code 43." This means the USB device has reported problems to Windows. The standard repair is to open Device Manager, expand the "Universal Serial Device controllers" category by clicking the "+" sign, right-click each device in the category, and select "Uninstall." Reboot the computer and let Windows re-detect each USB device. If the device still reports "Code 43," either you have faulty drivers or a faulty device.
What causes a video card to go out?
Three the most common reasons are - overheating - weak or faulty PSU - faulty drivers
What can you do if the port on the motherboard is faulty and a device requires this type of port?
The expansion card
Does 32 bit diagnostics result pass when the device is not working fine?
no, if the device is connected fine and 32 bit diagnostics are run. It will not pass for a faulty device.
Will a faulty ground fault circuit interrupt device cause spurious breaker trips?
yes
Why does your laptop run OK in safe mode but not in normal mode?
You may have drivers (programs that tell your hardware how to run) that are faulty, in SAFE MODE all drivers are not loaded.
When you connect the usb device then computer will hang?
The device may be faulty. Using the same usb port try another device if it still hangs then its either: - driver issues, you can check this by going into device manager and look for a USB controller with an exclamation mark next to it. Try reinstalling the driver (right click on the device > uninstall > then scan for new hardware > when prompted choose search automatically unless you know better or have the motherboard driver cd) - It could be a faulty port (hardware) try the device in another USB port. If its the same machine try a port in a different location (So if you're using ports on the front of the case try the ones on the back). If this is the problem you can either stop using that port, have it repaired or replace the components/motherboard
Do you update BIOS with drivers OR firmware?
The BIOS for your computer is classed as firmware. Drivers are Windows components used to interface between devices (hardware) and software. Drivers are downloaded and installed under the control of Windows. A faulty driver upgrade may cause the related device to not be usable or may cause Windows to crash. It is usually relatively easy to recover. A BIOS upgrade should be downloaded only from the manufacturer of the motherboard of your computer. It will come with installation instructions. Take great care - a faulty BIOS change (e.g. one for another motherboard version) can possibly prevent the computer ever switching on again which is rather difficult to fix!
How do you fix faulty hazard lights on a 1994 Integra?
Faulty hazard lights on a 1994 Acura Integra can be fixed by replacing the hazard light relay or the defective bulbs. Hazards are used to notify other drivers that the vehicle is in distress.
Do I need a network card if I have an Ethernet connection slot on my motherboard?
No, unless if the internal NIC (network interface card) is faulty, unusable, or if you don't have drivers for it.
Why would speedometer and odometer not work on 1990 GMC S-15?
Probably a faulty speed sensor, it is mounted on the rear of the transmission on the drivers side.
If a 1993 corolla chimes as if the key is in the ignition and the drivers door is open only there is no kew in the ignition what could be the problem?
MY GUESS IS A FAULTY IGNIGION SWITCH.
