Want this question answered?
it depends on the type of the circuit you are analyzing..it could be a voltage divider, emitter follower, be specific on what type of circuit and maybe i can help you aobut this question.
Kindle help me to answer What is valve point loading effect and its applcation
Hi You can find the value of the resistor by using colour code printed on the resistor. 1. Hold the resistor such that the colour code starts from left. 2. Each of the colour bands present on the resistor specifies a value. 3. The first colour band represents the first significant figure, the second band represents the second significant figure and the third band indicates the multiplier. The fourth band represents the tolerance. Gold band- 5%, Silver band-10%, No band-20% 4.Find the appropriate values for the colour by using the chart 1. 5. Find the value of the resistor by using the formula 1. Chart1 Example: Here first band represent brown. Second band represent black. Third band represent red . Fourth band represent gold. The value of resistor = 10 x 102 ± 5% = 1kΩ ± 5%
The resistor doesn't have to be 250 Ohms, anything from 100-600 will work equally well. The power supply is a low impedance to the hart signal shorting it out. Adding the resistor raises the impedance so that the signal can be detected by the calibrator. A small reactor would also work.Ohms law states that a resistor must be present with current to receive a voltage (V=IR) this resistor converts current to voltage which is used as a digital voltage signal. (1-5 V).The HART protocol uses 1200 baud Frequency Shift Keying (FSK) based on the Bell 202 standard to superimpose digital information on the conventional four to 2OmA analogue signal.Hope this may help ful....Sudhan.Sshansudhan@rediffmail.com
A single point perspective is when you are drawing a picture and you have a dot on your paper. Every line you draw has to be lined up with that dot ...does that help?
The voltage drop across the emitter-collector junction develops the output signal with the help of a resistor or two in series. The output is 'seen' at the collector.
Synergists
There are many emitters in the universe. For example, the Sun is an emitter of electromagnetic waves and certain types of particles. It would help if you were more specific.
There are many colours for resistor rings but the reason that we have them is to help the resistor reduce the electrical current that is passing through.
The resistor color code use to help to identify the resistance of the resistor. There are four color in the resistor that help to identify the resistance of the resistor. The first and second color represent the numerical value of the resistor. The third color represent the multiplier. The four color represent the tolerance.
Fins have a stabilizing role; they help a dolphin to swim in a straight line.
It can. I use seriquel to sleep but I also have PTSD and it helps me with stabilizing my moods.
A 1998 Dakota does not have a ballast resistor.
yes resistor can check in CRO.Using an probes we can check it. CRO shows the waveform.
The isotope californium-252 (a neutron emitter) is used for the treatment of cervical and brain cancers.
The updraft of a tornado may help somewhat in stabilizing the atmopshere, but the parent thunderstorm normally would do that anyway.
Not really. They might help a little, but they are not surge protectors