Frist putt of the main incomer HT side then Rack out the breaker and put the LOTO after that Discharge the cable Both side (HT/LT).
You need to specify the phase. I assume it is 3 phase system. Then the HT current is 30.3 amps
Dielectric Strength of Vacuum is more than that of Air. In HT voltage is more than LT. So VCB is used in HT & ACB in LT. Rakesh Gaikwad
to reduce Current and Coast
ht in cm-100 deduct 10% if filipino or small frame.
Frist putt of the main incomer HT side then Rack out the breaker and put the LOTO after that Discharge the cable Both side (HT/LT).
You need to specify the phase. I assume it is 3 phase system. Then the HT current is 30.3 amps
Because the current is smal , the votage > current x ressistance willbe small and therefore will be only a smal percentage of the ht.
taking the tablet any problem my body
Note the HT side VOLTAGE,Current,P.F at the same time calculate the L.T side Voltage,current ,P.F.Convert the L.T side V,I,P.F to H.T side by using transformation ratio and calculate the Power in KW for both H.T side and L.T with respect to H.T Then Loss=H.T side power in K.W-L.T side power in K.W with respect to H.T
High current coming now that's why use the vcb
on the cab side of the motor. Just follow the ht leads!!
what HT Swichgear
Hf, reactants > Hf, products apex
Friction is the force that works against motion. It occurs when two surfaces rub against each other, creating resistance that opposes the direction of motion. Friction can slow down or stop the movement of an object.
HT Media was created in 1924.
HT Motorsports was created in 2001.