In signal processing, sampling is the reduction of a continuous signal to a discrete signal. A common example is the conversion of a sound wave (a continuous signal) to a sequence of samples (a discrete-time signal).
The Nyquist Therorem states that the lowest sampling rate has to be equil to or greather than 2 times the highest frequency. Therefore the sampling rate should be 400Hz or more.
>8000hz
Sampling rate or sampling frequency defines the number of samples per second (or per other unit) taken from a continuous signal to make a discrete or digital signal.
The sampling rate must be at least double the highest frequency component of the modulating signal in order to avoid frequency aliasing.
if the sampling rate is twice that of maximum frequency component in the message signal it is known as nyquist rate
As we know that the sampling rate is two times of the highest frequency (Nyquist theorm) Sampling rate=2 Nyquist fs=8000hz/8khz
The Nyquist Therorem states that the lowest sampling rate has to be equil to or greather than 2 times the highest frequency. Therefore the sampling rate should be 400Hz or more.
A: A sampling scope is not real time scope but rather a hi frequency rate of sampling which benefit the observer
>8000hz
Sampling rate or sampling frequency defines the number of samples per second (or per other unit) taken from a continuous signal to make a discrete or digital signal.
The sampling rate must be at least double the highest frequency component of the modulating signal in order to avoid frequency aliasing.
frequency is simply the rate at which something is happening, ie the frequency of Christmas is once a year, the frequency of having breakfast is once a day etc. If frequency is expressed in Hertz, it's how many times something happens during a second. Sampling is, well, sampling. Usually means testing and measuring something changeable. If you're running a bath and occasionally stick your fingers in to check the temperature, then that's sampling, Sampling frequency simply describes at which rate you're making whatever test or measurement it is you're talking about.
not sure what your asking, but if you are asking what i think your asking, you have to sample at least at twice bandwidth of the frequency you are sampling. This is known as Nyquist Rate http://en.wikipedia.org/wiki/Nyquist_rate
According to Niquest Theorem, it has to be more than twice the input frequency.
if the sampling rate is twice that of maximum frequency component in the message signal it is known as nyquist rate
You must sample at 2 x the rate of the analog signal (2 x the analog signal frequency).
sampling theorem is defined as , the sampling frequency should be greater than or equal to 2*maximum frequency, and the frequency should be bounded.. i,e fs=2*fmax where fs= sampling frequency