The answer is 38.
working principel and components of DTA
condenser approach is heat transfer the water to gas of condenser efficiency is good less then below (2 F) the system is working good.
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
A Carnot cycle representes a gas undergoing a theoretical - means it cannot be implemented realistically - thermodynamic cycle composed of 4 reversible steps (meaning you can go back and everything will be back to the state it was, or scientifically speaking, the entropy of the universe will remain constant): 1- isothermal expansion of the gas (working fluid) - heat is added from the surroundings to the working fuild and it expands at constant temperature; 2- isentropic expansion of the gas - the gas is allowed to expand and produce work; 3- isothermal compression of the gas - the gas rejects heat to the surroundings at constant temperature; 4- isentropic compression of the gas - the gas is compressed and work is need for that compression.
A few broad areas for your consideration- ELECTRICAL safety- when using any electrical equipment THERMAL safety- when working with hot items EYE and FACE safety- working with things that spatter. or produce ultraviolet light that can burn your eyes RESPIRATORY safety- breathing fumes from welding is very unhealthy FIRE safety- you can set things on fire MATERAIL HANDLING safety- cuts and strains/sprain when moving heavy or sharp items
Working capital is a measure of a company's efficiency and its financial health. A measure of a companies efficiency is an example of working capital.
The effect of the acid value is that it enhances the working efficiency of a lubricant.
working principel and components of DTA
Do a compression test on engine
Thermal power station of 210mw will work on principle of modified Rankine cycle
Ergonomics is the study of safe and efficient working environments.
It condenses the spent working fluid from the turbine output back to a liquid before it is recycled back into the steam generators of the power plant. This increases operating efficiency. Usually the condenser operates by running the working fluid through a network of pipes inside a tower. Water mist is sprayed on the pipes to cool them and an updraft causes a vapor cloud to exit the top of the tower.
we can predetemine the efficiency of a dc machines working as a motor or generator
Describe ways of improving own working methods and use of technology to achieve efficiency and reduce waste?Read more: Describe_ways_of_improving_own_working_methods_and_use_of_technology_to_achieve_efficiency_and_reduce_waste
Compression check. S-series see around 180 psi to be considered in good working order Compression check. S-series see around 180 psi to be considered in good working order
Wear! As the working surfaces wear out, they don't mesh as well.
don't build a lab area.