how do i change to front brakes on a dodge durango?
under the dash
Answering "How do you replace the brake pads on a 2004 Dodge Durango limited with anti lock brakes?"
You will need to remove the tire and wheel from your 2005 Dodge Durango. Remove the brake pad Springs and calipers. Tap the rotors with a hammer to loosen them. Slide the rotors off. Reverse the process to install the new rotors and brake pads.
It's at the top of the brake pedal under the dash.
dot3 or dot4
In the firewall behind the master cylinder.
To replace the brake light on a 2001 Dodge Durango the light lens must be removed. It is held on by a clip on one side and a hinge on another. It opens like a door to access the brake light housing.
The 2000 Dodge Durango brake lamp is a 3057 bulb. See sources and related links for a picture and additional information.
Bleed the brakes, adding fluid until clean fluid comes out from all four tires.
There are several tools you will need to change the brake pads on your 2001 Dodge Durango. You will need a 9/16 socket wrench. You will need a screwdriver. You will need a needle nose pliers. You will need a lug wrench to remove the tire and wheel.
Check the fuses and if they are good then check the brake light switch.
Very easy. It has two pins that you remove.
The fuse box in a Dodge Durango is under the dash on the drivers side of the vehicle. It is located to the left of the park brake pedal. To get to the fuses to replace them, you need to open the cover.
A 5/16 brake wrench
no for sure not
how do change brake pads on a 2002 dodge pickup 4x4
The emergency brake release handle is to the left of the steering wheel. Down below, and is flush with the panel. Pull the finger tab and release.
I would guess that both of your brake light bulbs are burned out, and only the high mount bulbs are still working.