Want this question answered?
I believe that they need to be at least below the bottom of the skimmer so that, if the waterline were to drop below the bottom of the skimmer, the returns would not run dry. In my pool they are about 15-18" below the usual water level.
The pool's manufacturer. They are not at all standardized across brands, so you need to know what brand your skimmer or pool is, and it helps if you can locate a pool store and bring the old skimmer to them - they may be able to order one, even if they don't have that brand in stock.
Yes it can make a big difference to the amount of floating debris and dust that sinks into your pool. The ideal place for the static skimmer in a pool is down stream from the return jets (These are the jets that return filtered water to the pool) and down wind from the prevailing winds, this can be a bit more difficult to work out as the wind direction over a pool is strongly influenced by the building surrounding it. The fact is that very few pool builders get it right. if the skimmer ends up in the wrong position there is always the option of using a floating swimming pool skimmer skimmer. this type of skimmer is set to the suction of the pools filtration system and connected via hose to the vac plate over the leaf basket, It can be fastened in place or left to float free in the pool and will keep working regardless of water level, Check out the link below on floating skimmers
yes you can, just make sure that no one blocks the skimmer or the water return hole.
Yes it can make a big difference to the amount of floating debris and dust that sinks into your pool. The ideal place for the static skimmer in a pool is down stream from the return jets (These are the jets that return filtered water to the pool) and down wind from the prevailing winds, this can be a bit more difficult to work out as the wind direction over a pool is strongly influenced by the building surrounding it. The fact is that very few pool builders get it right. if the skimmer ends up in the wrong position there is always the option of using a floating swimming pool skimmer skimmer. this type of skimmer is set to the suction of the pools filtration system and connected via hose to the vac plate over the leaf basket, It can be fastened in place or left to float free in the pool and will keep working regardless of water level, Check out the link below on floating skimmers
Add thru the skimmer box
First off, you'll need a vacuum hose. I usually put the small end over the jet and fill the hose with water. After the hose is full put the large end in the skimmer. Place your vacuum head in the pool, attach the hose to it, now you're ready to vacuum.
Google Aladdin pool equipment ( Lilly Pad skimmer)
You only use the skimmer/s
Adding algae control to the pool skimmer helps to disperse the chemical and coats the filter media.
Attempting to obtain step by step diagrams connecting an above ground pool to a sand filter.
Yes possibly In reality, the skimmer will not cause a leak. What causes leaks are people who do not connect or glue the fittings to the skimmer properly. Or ground movement like earthquakes. k