You can run it 10 feet with NO fittings.
Nil. You need a pressure differential for flow to take place.
what amount of pressure you need to hidrotest 8 inch pipe
you have a severe pressure drop and a loss of velocity
For a fluid flowing in a pipe, the pressure loss will be greater for a liquid flow due to more frictional losses on the pipe walls.
i believe the pressure does not change but the volume of water you will be able to use will be less
49.334 psi is the pressure loss and to get the friction loss you would need to know the smoothness of the inside of the pipe.
250 PSI WELDED
What pressure or are you asking drainage THEN What pitch are you using
It depends on the pipe schedule and diameter... For example. Schedule 40 1 Inch pipe has a minimum burst pressure pressure rating of 1440PSI and an operational PSI of 270. Google can provide a complete chart. Just search "PVC Pipes - Pressure Ratings"
decrease in pressure from one point in a pipe or a duct to another point downstream of the fluid flow. It is due to frictional forces on a fluid that flow through a pipe or a duct
Not sure what you mean by pressure fittings. Threaded fittings for steel pipe are pressure fittings. Steel pipe with a 3/4" O.D. is known as 1/2" I.P.S. (Iron Pipe Size) pipe.
That's 3/4" pipe, not 3.4" prehaps it would deliver more pressure through the 1/2 inch pipe than 3/4 inch. 3/4" pipe will be less restrictive over the course of the run. Otherwise, no. 1/2" Copper Pipe will do fine, since it has a smoother bore, less restrictive, no lime and rust build-up. The only reason for you to use 3/4" pipe is if you want more volume. The pressure remains the same.