Want this question answered?
1/4"
Bender Should Not Be Allowed on TV was created on 2003-08-03.
You should use conduit bends when you want to bend a pipe to any angle, either 90 or 30 degree angles. To achieve this, you need to master the maths formulas for bending conduit.
For new 200 amp services the conduit size should be 3 inch PVC.
to prevent live conduit in case of short circuit
Generally, when using PVC conduit you should also run a ground wire.
There will be at lease three and on some conduits additional information. There will be the manufacture's name, type of material the conduit is manufactured from and the diameter size of the conduit. For example Scepter PVC 100 mm (for American customers 4") conduit.
Yes it should be grounded
An electrical conduit is commonly installed in several steps. The first step would be to carefully plan the position of the conduit and what materials that are required for the surface. Then one should execute the plan with common tools such as a screwdriver.
The outer casing of an Ethernet cable does not have a UV rating and will deteriorate under the summer sun. Pull the cable into a conduit and if possible bury the conduit underground. This will give you a safe and secure link.
Hey get call of duty: MoDeRn WaRfArE2
Souldryou run conduit parallel with the building if the fastest way is diagonal across the building