You will need the height, width and length to calculate the capacity
They are all different sizes.
You get the capacity of an aquarium by multiplying the length times the width time the height to giving you the cubic dimensions of the aquarium. You can than convert the results to gallons by using the conversion factor of 1 cubic ft is 7.48052 gallons or 1 cubic meter is 1000 liters.
Every tnak is a different size.
always measured in Gallons. depending on the fish you want, your tank size will change.
This will depend on where you live; it may be in gallons or litres.
yuo should at least put 10-12 fish in your tank
Fishbowls come in MANY sizes.
2 liter
400
10 kilometers
10 quarts
if there is a black out and you do have a fish tank you should be fine an less you have a chinease fish or any fish that is in the red mark for fish
The mass of a fish tank should be measured in kilograms.
You should have it running for about 2-3 days before putting fish in your tank.
Water, for starters.
IN WATER!!!! (TANK!!)
Both fish, and fish tanks, come in different sizes. So the number of fish that ideally should be in a tank, depends. Somewhere between one and a hundred would be normal.
Not unless you had another fish in there.
Salt Water Fish
between 8 to 12 hours a day. No more. Time of day is not important as long as the tank gets a full 12 hours or complete darkness.
It means the tank should be cleaned.
proably in a fish tank with the water not all the way full
That depends on the weight of the fish as compared to the weight of the water their bodies displace. If it's a heavy, dense fish, then the tank with the fish would weigh more. If it's a light, less dense fish, then the tank with water only would weigh more. This assumes that the water displaced has been removed from the tank, right? If you are adding the fish to the water then I think it should increase the weight regardless of the density of your fish. The question then might be, does the fish weigh less when it is swimming than it would on a dry scale?