The lever pulls at a wire which in turn pulls at an arm out by the hubs. This arm turns a cam or an axle that will activate the brake pads, either a separate pair for the handbrake, or the same ones used for the main brake.
Yes
If the rear brakes are out of adjustment,the hand brake will not work..
Hand brake? I thought the last GMC with a hand brake was in 68, but I could be wrong.
Usually located within the hand brake lever or pedal
Take out the hand brake and replace it
The P stands for Park. The Hand Brake is the brake you use while parked, hence why there is a P on it.
you ask it to stop
Bicycle brakes are usually levers
You will wear out your and brake, and make the engine work harder.ANS 2 You will overheat the brake and strain the engine. If you didn't smell brake overheating, you may be OK. However you should re-adjust this brake as it should have prevented the car from moving.
Hand brake sticking? Probably bad brake cables. Replacement is necessary.
Under the center conlsol next to the hand brake
Well to brake your hand you should bend it back until it cracks or cut your serculation