It is not that hard to replace a fuel pump in the 1970 Ford Torino.
If it had a carburetor , it wouldn't be hard to replace - it's fuel injected
where i look only year 1994 mazda b4000 truck -fuel sending that find hard time
The 'fuel' pump is inside the gas tank...very hard job..truck needs to be put on lift too drop fuel tank and then replace the pump..pump is not very costly at your local VIP
Yes, a clogged fuel filter can cause hard starting, stalling, and complete loss of fuel supply. A partially clogged fuel filter can also cause the pump to overheat and fail. If you suspect it is clogged, replace it.
Not hard at all once you drop the fuel tank and drag it out from under the van.
No.
The Fuel Pump in a VT is located in the Fuel tank, as in most cars. I think you need to remove the fuel tank to replace, obviously great care needs to be taken.
Your acellerator pump is allowing the carburetor to almost flood.you need to replace the accellerator pump piston.
Hard starting, stalling, and eventually a no run condition. Be sure and replace the fuel filter.
It is located under the hood, upper engine area, driver's side, mounted in fuel line. Hard to see and hard to replace, but it is there. Follow the fuel line and you will find it.
Hard starting and stalling. When in doubt, replace the filter.