GLUE PLACE BIKE IN WARM AREA AND GENTLY PLIE THE EMBLEM OFF TAKE YOUR TIME SO NOT TO DAMAGE THE PAINT....THE GLUE IS A 3M TYPE PRUDUCT AND LOOKS LIKE THAT GUM YOU USE TO STICK STUFF ON THE FRIDGE... HOPE IT HELPS YOUR PROJECT ROBI
Thank you....did this a few months ago and it worked great. A bit of the foam and the glue residue would not come off with my fingers but a wipe with "goof-off" made it perfect.
4.1 gallons.
Fuel capacity is 4.2 gallons.
below gas tank on right side. just above the motor
Follow the fuel line from the fuel tank and you will find the filter.
I'm pretty sure it does. I own a 1995 Vulcan and I bought a 2003 tank and looked at the mounting brackets and fuel connections all looked to be the same - but don't put this in stone. I haven't been able to put it on yet because it's still out being painted. There should be no difference in the fuel tank mounts from 1996-1005, but as always, check with a professional if this information is critical.
I have a 2007 Vulcan 900 and I got only 125 miles off a tank of gas. I was on the hwy and driving between 75-80 mph
MAKE SURE TO ADD "FRESH" GASOLINE TO THE FUEL TANK AND MAKE SURE IT IS ENTERING THE CARB.
Issues can arise from having too much. Its not worth the risk. Syphon some out or drain it until you have the proper level.
I took the seats off. Loosened the boly at the back of the gas tank. Lifted the tank up and used a 5/8 socket with rachet extention. not sure if that is right, but it worked.
i have one that gets 55mpgmine got 52 the first tank heavy town driving, then on the highway I got 59 mpg. so about 55 is a good average to go on.
how can i remove tank emblem from my hatley
Very carefully....