Want this question answered?
no it does not due to the fact it does not have a camshaft. it does however have a crank sensor. the jeep 4.0L engine is a OHV engine not OHC. that means it is a pushrod engine instead of a camshaft driven engine
A straight, gear-driven shaft that contains lobes used to operate the intake and exhaust valves of a reciprocating engine. The camshaft is geared to the crankshaft in such a way that valves close and open at the correct time relative to the position of the piston in the cylinders.
There are many components but the most noteable are the block, head, crankcase, cylinder, piston, piston rod, crank shaft, camshaft, and flywheel.
A camshaft opens/closes the intake/exhaust valves at predetermined points of the piston travel. The cam is driven by the crankshaft, the rotating cam lobes operates thru lifters/followers that ride against the lobes.
because they have a light weight frame they are able to get away with a piston engine witch make is that much cheaper
The Honda 2.2 diesel engine has a chain driven camshaft, not a belt driven one. The same applies to the 2 litre and 1.8 litre petrol engines but the earlier 1.7 litre engine is belt driven.
Its a compression engine, as opposed to a spark driven combustion. No spark plugs! To start the engine, the piston is forced up (by a starter), it compresses the (heated) fuel in the piston which then ignites (under pressure) forcing the piston back down and initiating the engine to turn over.
yes,the exhaust camshaft is belt driven,and drives the inlet camshaft by chain inside top of engine
Engine configuration is an engineering term for the layout of the major components of a reciprocating piston internal combustion engine. These components are the cylinders and crankshafts in particular but also, sometimes, the camshaft(s).
The camshaft is driven by the crankshaft, via chain, usually, or, gears.
the fuel is injected in to the cylinders and lit which pushes tthe piston and drives the camshaft which drives the drive shaft
By a chain or belt from the crankshaft.