Want this question answered?
This is a continuous strip of concrete which support load bearing walls which sit on the centre of the foundation.
This could be a complex situation. If the home has been insured with the same insurance company during all of these plumbing leak losses and now the foundation damage it would be wise to report a claim. Expert opinions on the cause of the foundation problem may be required in order to assess coverage. Sometimes insurance companies hire the expert to look into it (oftenly to support a denial, unfortunately). //
By using a stainless steel angle support or channel support rail set in concrete Brick work would be placed on these types of support
As I would interpret the question, I would refer to the nature of reinforcing to be placed within the concrete. Often in large beams, the reinforcing steel may be made up separately in "cages" and set in place for the concrete pour. The reinforcing may be comprised of shear, bending, torsional, and specialized support components.
In geotechnical engineering, bearing capacity is the maximum vertical stress that the ground surface (or any other subsurface strata that the vertical stress may act upon) can support without significant settlement or foundation failure.
This is a continuous strip of concrete which support load bearing walls which sit on the centre of the foundation.
Floor joists in standard U.S. residential construction are supported on the outer walls by a foundation, typically cement block or concrete. Between outer walls, support may be necessary in the form of a support beam resting on posts which transfers load to a concrete pier.
28 days is the usual cure time for structural concrete. For street pavements and driveways made with 6-Sack concrete, 3 days of cure will support a car, but 7 to 10 days is required for it to support trucks. All concrete continues to cure forever, as long as moisture is present.
Steel pole barns provide a strong, versatile storage or workplace. You will need a flat concrete foundation to support your pole barn.
The layer of concrete below provides the foundation for this building. i.e. it is what supports the building and stops it from moving about or sliding. Alternatively; The constitution is the foundation of politics and the political system in the UK today. In both cases they mean the basis or support of something.
For a foundation for a building, it is necessary to excavate at least below the soil zone, and further, sufficiently to enable a strong enough concrete foundation to support the intended building. Commonly, the base of the trench (the footing) will be a few times wider than the actual width of the foundation wall, so as to provide sufficient load bearing for the building.
Absolutely as long as your floor can support the enormous weight. If not on a concrete foundation, supports may be needed under where you plan to place the aquarium.
This question is not clear. A slab alone shouldn't support a load bearing wall, except for a shed type of building.
Strip foundations are used to support a line of loads, either due to a load-bearing wall, or if a line of columns need supporting where column positions are so close that individual pad foundation would be inappropriate.
The cracks in concrete and its inability to support certain structures is what is called distress in concrete.
For a foundation for a building, it is necessary to excavate at least below the soil zone, and further, sufficiently to enable a strong enough concrete foundation to support the intended building. Commonly, the base of the trench (the footing) will be a few times wider than the actual width of the foundation wall, so as to provide sufficient load bearing for the building.
Basecrete, the best solution for crack repair in concrete decks and other concrete structures Basecrete is your go-to option for repairing cracks in concrete structures. Upon curing, Basecrete doesn’t shrink, ensuring the area filled with Basecrete remains tight and intact. However, when repairing larger cracks, using Basecrete Mesh as an additional layer of reinforcement and support ensures your structure withstands the test of time.