When a p-n junction is formed then holes and electrons combine near the junction and some portion near the junction neutralizes.Now more electrons and holes cannot combine because of the existence of the neutral layer.They need energy to cross that layer.This raises a resistance between the flow of electrons and holes.This gives rise to the barrier voltage.
if the two parts are next to each other, a junction. if not, nothing.
point contact has the least junction capacitance
what is a summing junction?
Spaghetti junction, aptly named!
A pn junction can be formed by bringing the p and n type materials together.
yes
A junction.
synapse
when a p-n junction is formed electrons from the neutral N type goes to neutral P type. In the junction there will not be any electron or hole. In the junction because of earning electrons, P side becomes negative(ion) , & N side becomes positive(ion). So there will be a potential deference . This is known as the BARRIER......
An aulacogen is a tectonic trough on a craton which is formed as the failed arm of a triple-rift junction.
The knuckle is formed by the junction of the metacarpals and the proximal phalanges of the fingers.
depletion layer surrounding the junction where electrons from N side have fallen into holes from P side.
the Monongahela River
The junction formed by the combination of a P- type & N-Type material in known as PN jn diode. It is used as a switch as well as a rectifier.
we cannot make thyristor using two diodes. because the PN junction cannot be made when we connect with wires or solder it. that junction is only formed when we diffuse n material into a P material and vice versa.
When a p-n junction is formed then holes and electrons combine near the junction and some portion near the junction neutralizes.Now more electrons and holes cannot combine because of the existence of the neutral layer.They need energy to cross that layer.This raises a resistance between the flow of electrons and holes.This gives rise to the barrier voltage.