The speed of light is about 300,000 km/sec. Just divide the distance by the speed of light. The answer will be in seconds; divide by 60 to get minutes, by 3600 to get hours, or by 86400 to get days.
Shorter wavelength, higher frequency.
it takes 15768 mins it takes 15768 mins It takes 1337 Minutes
-- Increase in your distance from the transmitter you're trying to hear. -- Mountain or large building between you and the transmitter you're trying to hear. -- 'Destructive interference' (cancellation, out-of-phase addition, even-Fresnel-boundary reflection) between the direct signal and a reflected copy of it, both arriving at your receiver. If that's the problem, it goes away when you move a small distance ... as little as a few feet in the case of FM or TV.
A: AM radio is an Amplitude Modulation transmission . Meaning it has fix frequency but it is modulated by the signal. FM Frequency Modulation the frequency is modulated by the signal
DME
Distance = 3.03 x 109 kmSpeed of radio = 3 x 108 m/s = 3 x 105 km/sTime = (distance)/(speed) = (3.03 x 109)/(3 x 105) = 1.01 x 104 seconds = 2hrs48.3min (rounded)
That distance you gave is nearly 200 astronomical units so if that is right the time would be 8 minutes times 200, which is 26½ hours.
That was the Voyager I and II spacecraft. Voyager I is 10 billion miles away from the sun (the Earth is only ~93 million miles from the sun and Pluto is 3.67 billion miles). A radio signal from Voyager takes ~15 hours to reach Earth.
Increase the incoming signal between every even distance
Increase the incoming signal between every even distance
One AU, the distance from the Earth to the Sun, is 500 light-seconds. A signal to a spacecraft at a distance of 3.3 AU would take 500 x 3.3 = 1,650 seconds, or 27.5 minutes.
The Turn Signal Switch is bad in the column and needs to be replaced.
Interestingly, the distance varies from a hundred yards (or less ) to a quarter of a mile (or more!).
22- Coolant sensor signal out of range22- Coolant sensor signal out of range
Echo can be caused by Atmospheric, magnetic between 2 signal points, depending on location & distance of signal points & caller
Nothing happens. Distance between crests is a measure of frequency; amplitude is a measure of the strength, the height of the wave, or auditory volume of the signal.
Central hub (repeater) increases the distance a signal can travel between devices.