If you have to ask you aren't up to the task. If you are checking what a mechanic told you then you should find another one you feel you can trust.
what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer
take the inner fender wall out
how long does it take to put a water pump in a 2002 gm sierra truck
About 2 hours
to install a water pump on a Toyota tercel 1.5.
I was able to remove and reinstall my fuel pump in my 540i in about an hour.
How many long does it take to fit a timing belt and water pump for a vauxhall zafeiraRead more: How_many_long_does_it_take_to_fit_a_timing_belt_and_water_pump_for_a_vauxhall_astra
Drain the cooling system.Remove the air filter housing.Remove the water pump belt and the water pump tensioner and any associated brackets.Unbolt and remove the water pump cover.Use a Northstar water pump socket (nothing else will work), rotate the water pump slightly clockwise, then pull it out.Replace the water pump seal. This usually is not included with the new water pump. Reverse the above steps to install the new water pump.Let me know if this helps. It looks like a hard job, but if you take your time it's pretty easy and doesn't take long. Don't rush or look for shortcuts.
To replace the Cavaliers water pump, drain the radiator. Remove the pumps drive belt. Unbolt the pump and take it off ( you might have to take the fan and shroud off to get to the pump.) Install the new pump and put the belt back on. Refill the radiator with antifreeze.
there is a special tool that you install from the front of the motor. there is an axcess cover tot he from of the water pump. the tool holds the pump gear so that you can remove the water pump and not have to take the timing chains off to do it.
i paid £15.00 to replace my water pump how long does it take to fit
Drain the radiator. Remove the water pump belt. Take off the fan shroud, then the unbolt the fan. Unbolt the water pump and remove. use new gaskets and gasket sealer to install the new pump.