Want this question answered?
On eBay or Ryder Fleet Service about $20. The heater is in the block but Dodge doesn't include the cord..
To replace the cord for a block heater on a 2000 Malibu, unplug the old cord from the block and plug in the new one. The end of the block heater cord can be found by tracing the cord back to where it is plugged into the motor.
Since approx 2003 the cord for the block heater has to be purchased separately.
plug it in and screw on the outside nut
If there is no cord hanging you have to buy one.not all trucks came with thr cord.the heater is in the block.check for the cord by the grille....vinny
If its just the cord, then follow the old cord to the back side of the engine ( really the side of the engine closest to the firewall ) and replace it. When the engine is cold, plug it in and you will hear the block heater heating up. If you don't hear anything, then replace the heater also. That requires a little more knowledge.
I need or replace to heater cord on my kia sportage not sure how to get started how much damage am i doing to my car if i still cont. to use it just make sure it has water
The engine block heater on a Dodge Caravan could be in a number of places. However, the cord for the electrical connection should be near the battery.
Very few where built with the cord from the factory. On the diesel it is located on the pass side. The heater element is behind the oil filter. The cord usually has to be bought from the dealer and installed.
The heater will be in the block behind the oil filter. The cord was optional. You generally have to buy it from the dealer.
The block heater cord was an add on accessory. If equipped, it is located on the passenger side of the engine
The 2004 VW Jetta block heater can be found on the right hand side of the engine block. You can follow the block heater cord directly to the block heater.