Depends on your mechanical ability. I know one that was put in a few hours and others that took days. Check with a trusted mechanic that works on foreign made vehicles. The other thing is the age of the vehicle and availability of parts.
You take out the transmissioon, take out the clutch, put a new one in, and put the transmission back in.
you should see a little knob near the front of the engine, slightly to the left of where you put in the oil it'll be connected to a cable that goes underneath, that'll be the clutch cable, turn the knob, it will adjust the clutch, take it to a garage, they'll charge you 60-200 bucks
all depends on the vehicle some take up to 6 hours others take up to 8to 12 hours
To put the camshaft in takes a few minute. To strip down the engine to the stage where you can fit the camshaft and then rebuild it can take several hours.
Put your foot on the clutch (or footrest for Auto) and check under the dash about halfway up your shin.
usually a clutch will cost u around $300 to $400 , it is pain to try to do one yourself, trust me , i been there done that, good luck
First you will have to take the motor out and separate the Transmission from the motor, then you have to take the clutch off of the flywheel and put the new one on with an alignment tool, then you put it all back together.
pull the trans take out the old clutch and put a new one in then put it back together. or do what i do i buy a book on my ranger and fix it myself
take it to a mechanic who knows what there doing
Take off the radiator cap and put water into the transmission. Adjust the clutch plate to 37 degrees (F) Then take off the exhaust and and put in your backseat. Then you have to turn on the cruise Control and add oil to you washer fluid and pump the clutch and pump the clutch at thbe same time you guys are a bunch of retards and cant taKE ANYONE SERIOUSLY
About a half if done profesionally.
It could be that your clutch is not longer working. You should take your car to a car mechanic, so that you can get it fixed.