0
They do vary, but
1.5 amp running
2.5 amp stall
are the common ratings
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How many amps will a 24 volt dc motor draw if running at 12 volts?
Depends on how big the motor is. A stronger motor will draw more amps then a weaker or less efficient motor. For example a wiper motor draws far less then a starter motor.
Why would only one wiper work on your car?
In many cars, there is only a single wiper motor. One wiper arm is attached directly to the wiper motor and the other through a linkage. If one is working, the motor is operating but the connection to the other may be broken.
How many amps does a garage door motor use?
about 3 or 4
18kW motor will take how many amps?
53000Amps
How many amps are in a twelve volt motor?
That depends entirely upon the type of motor. A car starting motor may take a few hundred Amps for the short period.
How many amps will a 75KW 525v motor draw?
23
How many amps does a 15 hp motor draw?
To answer this question the voltage of the motor must be stated.
How many watts can be expected form a windshield wiper motor?
It should give you that information on the side of the motor
Why is my single phase induction motor drawing to many amps?
I have a single phase induction motor. It draws 8 amps on start up and climbs to 14-15 amps when I put a load on it. When I don't have a load it runs at 1 and climbs to 2-3 amps. It is normal operation for this motor to run at the lower number of amps with a load. But I don't know what is wrong.
What can you do to troubleshoot the Windshield wiper motor for a 1994 Mercedes C-280?
You need to remove the wiper motor and linkage assembly. Then disconnect the motor from the linkage, and turn on the wipers, to see if the motor is running or not. Then when you have the linkage out, manaully move back and forth to see if its binding or not. Usually a bad motor. Unfortunately, MB seems to have many problems with the wiper blade motors.
How many amps will a 120 kw dc motor require?
Depends on the voltage.
How many amps drawn a 110KW motor?
Watts = Volts times Amps. Therefore, if the voltage was 220 volts, the motor would draw 500 amps. If the voltage was 4,000 volts, the motor would draw 27.5 amps. The voltages for large powerful motors tend to be relatively high, for example in the 380 Volts to 11,500 Volts range.
