0
there really arent that many holding it on. about 4 on each side on the rear of the fenders. and the 2 radiator support bolts. thats about all.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you take the front seat out of a 1999 Chevy truck?
If it is the new body style 1999 truck, you will need a 15 and an 18 socket. Slide the seat all the way forward to remove the back bolts, slide the seat all the way back to remove the front bolts , unplug the seat belt sensor and lift the seat out.
How do you change a flywheel on a Chevy truck?
How do you change a flywheel on a Chevy truck? You can remove either the engine or the trans. Once you have either removed just remove the bolts holding the flywheel in place.
Ow to remove title steering on 1989 Chevy truck?
Are you looking to repair the loose bolts to tighten it up or remove it from the truck totally? Let me know i will help all I can.
How do you change a door handle on a Chevy truck?
You will need to remove the inside door panel of your Chevy truck. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
How do you remove factory stereo from 2004 Chevy silverado truck?
put the parking brake in, then put the truck in 1st gear pop the dash cover off and then remove bolts from stereo.
How do you change pitman and idler arm on Chevy truck?
According to my internet research, to change the pitman and idler arm on a Chevy truck, one must remove the two bolts holding the idler arm as well as the nut holding it to the truck. Then to remove the pitman arm, remove the nut and the drag link.
How do you replace starter on 1988 Chevy 1500 pickup?
Remove the positive battery cable from your 1988 Chevrolet 1500 pickup truck battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
How do you remove the driveshaft from a 1999 Chevy s10 pickup?
Make sure truck is level or pointing downhill is even better. Remove the 4 bolts at the differential. Pry the driveshaft forward. Slide the front out of the transmission. Hold the front most piece with your hand as it comes out of the transmission. At re-assembly torque the bolts to 15 ft/lbs.
How do i replace Hydraulic clutch 1998 Chevy truck?
You will need to remove Transmission, And you will see it in the bellhouseing. 4 bolts hold it in place.
How do you replace the heated side mirror ONLY on a 2003 Chevy Silverado Truck?
Remove the inside door panel from your 2003 Chevy Silverado pickup truck. Remove the wiring harness from your heated side mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.
Will 1990 Chevy truck front suspension work on a 1970 Chevy truck?
No they will not.
How do you remove a front axle from a 2001 Chevy truck?
I'd need to know if you had a solid front axle or a double wishbone independent front suspension in order to answer this.
