two
bolt pattern for a 1994 ford thunderbird
To remove the starter you just disconect the starter cable & the push-on relay connector from the solenoid. Then unfasten the starter retaining bolts and remove the starter. To install the starter, put the bolts in the top and bottom figer-tight. Then (starting with the top most bolt & working down)tighten the bolts (to 15-20 ft. lbs.)
Could it be your starter won't work because... Ford didn't make a 1998 Thunderbird?
Follow the top radiator hose back to the engine. This is where the thermostat is. Remove the 2 bolts and there it is.
For a 1994 Ford Thunderbird : ( DOT 3 brake fluid , meeting Ford specification ESA-M6C25-A )
A 1994 Ford Thunderbird is ( OBD I )
Unscrew it
Remove - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
Trying to remove the oil pan from 1994 thunderbird, what tools will i need to purchase? we are trying to remove the oil pan from 1994 Ford Thunderbird (have a leak), can you tell me what tools I will need to purchase? Thanks
The starter solenoid is physically mounted on top of the starter motor itself.
Disconnect the - battery terminal Raise and support vehicle if needed Disconnect wiring at top of starter Remove mounting bolts Drop starter
No.