11 893.0945 pounds per square inch
Incidentally you can do conversions like this using Google. I spelled out 'megapascals' to receive this result.
1 psi = 64984.65 Pa Therefore 50 MPa = 769 Psi
MPa x 145 = psi
the pressure in the hadal zone exceeds 1,100 standard atmospheres (110 MPa; 16,000 psi)
The pressure at that depth is 2,167.6 pounds per square inch.I assume you mean a depth of 5000 feet in the ocean, say about the depth of leaky oil wells? If that's the case, when you see the oil coming out as fast as water out of a garden hose, it is pushing against that one ton per square inch pressure at the same time. If that leak was on the surface of the ocean instead of so far down, it probably would be squirting out at supersonic speed.
0.145 psi
Multiply psi by 0.006894759086775369 to convert from psi to MPa. ex: 1000 psi = 1000 x 0.006894759086775369 = 6.89 MPa http://www.chapelsteel.com/psi-mpai.html
1 psi = 6.89476 kPa (rounded) 1 kPa = 0.14504 psi (rounded) 1 mPa = 1,000 kPa
1 psi = 64984.65 Pa Therefore 50 MPa = 769 Psi
1 MPa = 145.038 PSI.
300 mpa
bar x 14.503773773 = psi 1.5 bar x 14.503773773 = 21.76 psi (rounded)
It is 217.556607 pounds per square inch.
MPa stands for Megapascal, a unit of pressure. 1 Mpa is equal to 145.0377 psi
MPa x 145 = psi
Commercial grade Titanium (92% pure) is 63,000 psi (434 MPa). Certain titanium alloys (e.g., Beta C) achieve tensile strengths of over 200,000 psi (1,400 MPa). Megapascal or MPa is a unit to measure tensile strength.
1 psi = 0.00689475728 MPaAs such the average strength in PSI = (4620 + 4580 + 4400 + 4460 + 4200) / 5= 4452 psiAverage strength in MPa = 4452 x 0.00689475728= 30.69545941056 MPa= 30.7 MPa
Divide by 6.895 and multiply by 1000 to get psi (500/6.895) x 1000 = 72,516 psi