Park the vehicle on a level surface. Drain the oil and replace the filter. Add 4.5 quarts of the correct weight oil. Start the engine, run for 2 minutes, shut down, and wait 30 minutes. Check the oil level and add as necessary to reach the full mark. You now know the capacity.
5
4.5 quarts
how do i change out a power steering switch on a 2001 mercury sable with a 3.0 engine?
the v6 take 5.8 quart
The 2001 Ford Mustang owners manual shows ( 5 quarts ) of engine oil with filter change
No, you do not have to remove the engine.
it takes 11 qts some times 12
( 5 quarts ) with filter change - according to the 2000 Ford Mustang owners manual
You need to get a manual for the year model and engine to get that answer.
The engine in the Mercury Villager does not use a timing chain, it uses a timing belt. The recommended belt replacement interval is 105,000 miles.
Not needed as the thermostat is on top of the engine on the right.
Answer oil capacity for mercury mountioneer with 4.6 v-8 with filter change ========================================================================= According to the 1999 Mercury MOUNTAINEER Owner Guide : With engine oil filter change : The 5.0L V8 engine takes ( 4.7 litres / 5.0 U.S. quarts of 5W-30 )