Park the vehicle on a level surface. Drain the oil and change the filter. Pour in 4 quarts of oil and start the engine, letting it run for 1 minute. Shut off and wait 30 minutes. Check the oil level and add enough to fill it to the full mark. You now know the capacity
Remove the plug from the bottom of your 2000 Chevy transmission. Allow the transmission to completely drained out. Return the transmission plug to its original position. Fill the transmission with new fluid.
A 2000 Chevy 4.8 liter vortec engine usually takes 6 quarts. It truly depends on the vortec engine, usually the standard is between 5-6 quarts to fill the engine.
it takes 4 quarts of oil to fill a 2000 Mitsubishi eclipse
Filter service is about 5 quarts Dry fill is about 9 quarts.
CAPACITIES: Engine, with Wix filter # 51040.......4.6 quarts [1] Cooling System, Initial Fill..........13.8 quarts Automatic Transmission, 4T40-E Initial Fill..........6.9 quarts Automatic Transmission, Total Fill 4 speed 4T40-E..........12.9 quarts [1] After refill check oil level. TORQUES: Oil Drain Plug.....18 ft/lbs
It takes 5 quarts for the 3100 v6
it holds 6 quarts with new filter
Initial fill is 12.2 quarts
6 qts. with a new filter
If the pan was dropped, it takes about 4 quarts to fill it. If it was overhauled, it takes about 13 quarts to fill the convertor and everything..
Filter service is about 5 quarts Dry fill is about 9 quarts
It takes 4 1/2 to 5 quarts depending on the filter size. Be sure to use the weight oil that the manufacture recommends.