its a ignition coil which changes 12 volts of battery to a several thousands volts which is required for spark plug to create an ignition.
Ignition coil is a transformer type device that transform the 12 volts battery power to 30,000 up to 60,000 volts. The coil is composed of two winding, the primary and secondary winding.
Ignition coil is a transformer type device that transform the 12 volts battery power to 30,000 up to 60,000 volts. The coil is composed of two winding, the primary and secondary winding.
I believe is 12 to 14 volts.
NO several thousand volts. around 20kv.
Too much voltage an ignition coil does not run on 12 volts it is stepped down
The ignition only needs 12 volts for starting. You`re wiring harness has a resistance wire or ballast resistor to drop the voltage to keep the ignition coil from burning up.
An ignition coil is an coil that is used to change the volts in a battery to ignite the spark in the spark plug. This is necessary to get the engine to start up and the car to run.
You apply 12 volts to the coil primary and then release it . The electricity will go through the secondary coil and spark the spark pug.
The ignition coil on a car ranges between 3 and 5 amps, which it gets from a 12 volt battery. The battery produces DC current though the coil The coil can transform the low voltage of the batter to thousands of volts that are needed to start the car.
well you first need to tell someone is it electronic ignition or dose it have points ??
An ignition coil (also called a spark coil) is an induction coil in a automobile's ignition system which transforms a storage battery's 12 volts to the thousands of volts needed to spark the spark plugs.This specific form of the autotransformer, together with the contact breaker, converts low voltage from a battery into the high voltage required by spark plugs in an internal combustion.source is from http://www.madabout-kitcars.com/kitcar/kb.php?aid=269