Want this question answered?
its a ignition coil which changes 12 volts of battery to a several thousands volts which is required for spark plug to create an ignition.
Ignition coil is a transformer type device that transform the 12 volts battery power to 30,000 up to 60,000 volts. The coil is composed of two winding, the primary and secondary winding.
Ignition coil is a transformer type device that transform the 12 volts battery power to 30,000 up to 60,000 volts. The coil is composed of two winding, the primary and secondary winding.
NO several thousand volts. around 20kv.
Too much voltage an ignition coil does not run on 12 volts it is stepped down
I believe is 12 to 14 volts.
The ignition only needs 12 volts for starting. You`re wiring harness has a resistance wire or ballast resistor to drop the voltage to keep the ignition coil from burning up.
An ignition coil is an coil that is used to change the volts in a battery to ignite the spark in the spark plug. This is necessary to get the engine to start up and the car to run.
Part of ignition system. Stores energy to fire plugs.
No matter what dirt bike you are riding you will want to install the switch via the ignition coil. Obviously based on the dirt bike you will need to find a convenient place for the key switch but make sure you run it through the ignition coil. Especially if you have both a electric and kick start on your dirt bike.
You apply 12 volts to the coil primary and then release it . The electricity will go through the secondary coil and spark the spark pug.
The ignition coil on a car ranges between 3 and 5 amps, which it gets from a 12 volt battery. The battery produces DC current though the coil The coil can transform the low voltage of the batter to thousands of volts that are needed to start the car.