2 wires
3
3
8
How do the starter wires go on a 95 sunfire2.2 engine
3 bolts on starter, pull ,remove wires from start insert new starter and reattach wires and bolt into transmission
I am currently having the same issue. First unhook the battery completely. Then you need to find where the wires on the starter are connected to the battery. Detach the wires from the starter that go to the battery. Once you have the starter wires completely detached from battery you can start removal of starter from engine block.
disconnect cables at battery,then remove wires from starter,then take out 3 mounting bolts that hold starter in,sometimes you can remove wires when starter is out, if they are long enough.
It is on the top of the starter. The solanoid is what the starter wires hook to.
follow the wires that come off the positive battery terminal the starter has two bolts to take off then the starter comes off then unhook the power wires from starter
Remove - battery cable Raise and support vehicle Remove wires from top of starter Remove mounting bolts Remove starter If you cannot get to the wires there is enough wire to remove the starter and then remove the wires
Did you just put a starter on it ??? Sounds like the starter wires are on the starter wrong are thay are shorted out. CHECK THE WIRES GOING TO THE STARTER CLOSELY.