your 86 cr250 can be bored to .080 oversized by using a wiseco piston kit. the only problem is the factory cylinder is nikisil coated over aluminum sleeve. if you bore the cylinder to oversize you will need to reapply the nikasil coating over the aluminum sleeve.
the only other option is to install a steel sleeve so you do not need to recoat the aluminum cyl. either way is not a cheap way to go.
mom
Yes, it will fit and do fine! 1986 - 1991 are the same cranks.
hello how much horse power is A STANDARD cr 250 1991 , the engines are the same from 89 to 91 thanks alot johnny
42.68 kW or 58 HP
The spark plug gap for a 1986 Honda CR250 should be set at .024 inches. This is equal to .6 mm.
A 2006 CR 250 motorcycle would have about 50 horsepower. The older models were only 40, but some of the newer ones have 50-60 horsepower.Ê
what is the stock bore size for a 2001 honda cr 250r
a cr 250 will go 120 mph. i have and enjoy riding 120 mph it is so fun ;)
85,95
It's got around 55-60hp. In 2005 it had 59hp at the flywheel.
the Honda cr 250 is alot faster on take off up to its topspeed but the 4 strokes are usally faster at top end but it depends the gearing
A CR 250 is a Honda 2 stroke motocross bike.Ooops, forgot that Husqvarna also has a CR 250, also a 2 stroke motocross bike.