With your engine cold there usually is a cold fill mark on the reservoir or
there might be a dipstick attached to the reservoir cap that has a L or F
mark
Either at top of radiator or through coolant recovery tank
In the top of the radiator or through the coolant recovery tank
You first pour coolant in your car
A leak. You need to see where it is coming from.
It is not suggested to put water in a Toyota Rav 4. The engine cooling system can get too hot and coolant is preferred. To pour coolant find the coolant reservoir and pour fluid until the max line is filled.
700
Antifreeze should be a 50/50 mix with water. If you bought pure coolant, mix with water. If you bought premix (already 50/50) pour in straight.
Just pour it into the coolant tank. Don't overfill, use 50% water and get an extra 15lb coolant tank cap.
tell someone immrediately
You don't need to wait. As soon as everything is sealed up you can pour in the coolant mix.
Once the cooling system has had time to depressurize, open the radiator cap and pour your coolant in.
You remove the cap and pour it into the coolant bottle.