The trip coil has the whole circuit load amperage flowing through it. Thepurpose of the breaker is to only allow current up to its trip point. That is the only way that the breaker can sense if the current is within the limit rating. If the circuit load amperage becomes greater that the breaker rating it will trip. The trip coil that you refer to is a magnetic trip which senses the magnetic field that surrounds the wire. Breakers also have a thermal trip which senses a heat build up on the current flowing through it. If the breaker is in a high ambient temperature it will lower the rating on the breaker.
DC = direct current.
Fuses and circuit breakers are designed to open a circuit when an excess amount of current occurs, so as to break that flow of current.A circuit breaker or fuse.
Yes. Current consists of electrons flowing in a circuit.
The current (in question) flows through both the circuit AND the circuit breaker [they are in series]. Within the circuit breaker when the current exceeds the preset limit it will open the circuit thus stopping all current flow. There are two common ways of doing this 1) magnetism - a coil pulls a switch open 2) thermal - a bimetallic strip bends away from its contacts, which opens the circuit.
An air circuit breaker, or air-blast circuit breaker, is a type of circuit breaker used in high-voltage transmission/distribution systems. It uses compressed air to (a) operate its tripping mechanism, and (b) to extinguish the arc created by a fault current. A miniature circuit breaker is a type of circuit breaker used in low-voltage applications, such as the protection of lighting and power circuits in a domestic residence. It uses a spring to operate its tripping mechanism, and relies on the speed of operation to extinguish the arc created by a fault current. Apart from the fact they are both designed to interrupt a fault current, there is really no other similarity.
A circuit breaker is a device used to open a circuit if too much current flows through it.
A circuit breaker.
Current flows through a complete circuit.
Both fuses and circuit breakers cut off a circuit from its power supply when the total current through the circuit exceeds the current rating of the fuse or circuit breaker, usually due to a short to ground or overloading of the circuit. Both use materials that respond to heat.
since circuit breaker consists of coils they get heated up when high current flows, when this happens the coil get energised and pull the moving contacts to open thus the circuit breaker opens when high current flows.
True
DC = direct current.
An electrical current.
"circuit"
This is the general description of how a circuit breaker operates.
complex circuit
True