The imbalance will cause vibrations in the crankshaft that will wear out the main bearings and the engine will lose oil pressure.
A flywheel is on the outside of the motor, typically has fins on it, it is weighted to keep the inertia of the motor spinning to help crank the motor over
no
rickracers.com flywheel magnet repair kit
The side with the raised parts of the flywheel go twards the torqe converter .
Modern starters include: * the starter motor... a motor * the solenoid, which engages the electrical current to the starter AND engages the gear to the flywheel. * the bendix, which is a gear that engages the starter to the flywheel.
No, it connects to the flywheel.
Remove the trany and you will see the flywheel bolted to the rear of the motor. Remove the bolts & replace the flywheel. Check the starter as a bad starter can chew the teeth off of a flywheel very quickly.
should be on a tag on the flywheel end of motor
Motor itself, yes. My need to exchange flywheel.
no they are different.
Counterclockwise as looking at it from the flywheel.
Flywheel key (or shear pin) can shear off which will put the motor out of time and wont start . It could do damage to some other parts but that is the most common.