How much do plumbers charge to replace the toilet kit?
Most plumbers would charge 2 hours to replace a complete toilet.
To re and re a toilet is less than one hours work. So, one hour of whatever your local plumbers charge.
Plumbers charge different rates for labor. In St. Paul and Minnesota, plumbers charge between $75 and $130 for their labor.
This obviously depends on the difficulty of the job and how much time you have to spend on it. Is this a new installation, or do you just want to replace an old toilet? Have the old toilet been removed? Is the water line in good shape? Does it connect easily to the new toilet, or do you have to modify it. Is the flooring under the toilet in good shape? Most plumbers charge by… Read More
If you mean toilet floor gasket, that is less than 1 hour labour. Call 3 local plumbers or handymen and ask rates.
The wax ring costs about $2. -Most plumbers can do it in about 1/2 hour. Even competent amateurs can do it in less than an hour.
In Boston they have mostly charge $125 an hour.
I do that often, average cost is cost of the toilet, floor seal, connector, and one hour labour. (in my case $50 -Most plumbers are much more -)
Many people "fix" or replace toilets. Many handymen do it very adequately. Plumbers will do it (but with a much higher labour cost) . - A complete re-re of a toilet has never taken me more than 1.5 hours. Average is less than an hour.
Depends how much of it you replace . Also how much flooring you remove if you can't get underneath.
As a flooring installer in CT we charge $50 to remove and re-install the toilet.
I cannot speak for all the other master plumbers but I charge normally $2,000 - $3,000 per day for my services for 7 hrs
I charge no less then $18,000 for a 4" pipe and more for larger sizes. -- Depending on your location, the industry average could be much less than that. With any luck, you can get competitive bids from a number of plumbers. You can contact a local remodeling contractor who will suggest a figure if the plumbers will not.
The exact amount will depend upon the exact plumber and what company they work for. Most plumbers in Atlanta will charge around $75 per hour.
I just was charged $135.00 an hour and he charged about a 125%profit on the parts parts that was installed. RIDICULOUS
Usually that would be 1 or 2 hours.
depending on your area, $80.00 on up.
Many master plumbers send out employees who are not master card holders and still charge the same rate. In locations that do not require an employee to have any type of license ( NYC for example) a Master plumber can hire over 500 employees and charge any rate they want. It is not uncommon for the franchises to say "we are sending a technician" out as they are trying to get over licensing laws and… Read More
Most mechanics in the United States charge between 45 dollars and about 95 dollars per hour. To find out how much a mechanic will charge to replace a part, you will need to see how long it will take to do the service and estimate the cost of the parts.
it can cost from as little as 100 to as much as 1000 depending who does it and what is actually wrong. if the flange is cast iron it will be more. if it is glued abs or pvc and the drain is broke thats gonna cost more than 200. you may not need to actually repalce the flange and you may be able to use a metal repair bracket. If the flange is unrepairable… Read More
Depends how much plumbers charge in Seattle. -It takes about 3 hours to install a gas tank if it's a straightforward installation and no other pipes or obstacles are in the way. (I do many)
If a gas pipe was there already, it is only about 30 minutes work at most. You should call 2-3 plumbers and inquire about rates for this.
how much to charge to change a stater on saturn
It takes less than 1 hour labour, plus cost of toilet, gasket and new SS hose. You add that to about $100 for a plumber, or you do it yourself and learn something.
If you mean installing on an existing flange, it takes less than a half hour. Who knows how much a plumber will charge .
Generally it's a 2 hour job, sometimes 3. - So it depends what plumbers in your area charge. Get estimates from 2-3 of them before deciding.
Depends on whether you already purchased it and whether other parts are needed. If you have the toilet, a Kant leak, a wax seal,FLEXIBLE toilet supply, and the (nuts,bolts and washers) for screwing the toilet to the floor flange, plumber should not charge more than one hour of his rate to install it. Make sure the plumber does NOT silicone around the toilet. If there is a leak from the wax seal under the toilet… Read More
how much does a mechanic charge to replace a freeze plug on a chevy el camino 8.0
That would depend on what's wrong with it. Most things can be done by the owner. Parts to replace everything that can be replaced would be $50 or less.
It cost me $243, that included a charge for diagnostic.
Maybe $100 tops....
Yes, -but the tank is filling up and will soon overflow starting at the lowest toilet. Much easier to service or replace your septic pump .
city plumbers earn up to £50000
any where between $80 to $120
It depends on what the job is. Plumbers are not cheap.
A dollar a hour
area of toilet: 5'* 5'
If you do it yourself it could be less than a $50 job, depending on the kind of sink and how it's incorporated into the counter. Once you hire a plumber it will get much more expensive. The cost will vary a great deal depending on what part of the country you are in and how much work is available for the plumbers in your area.
I charge $226 to remove and reset a toilet in the Los Angeles area. This is a standard price, but there are always exceptions for vintage toilets and other non common situations. ANS 2 - Anything over 1 hour labor to remove and reset a toilet is over charging. I do many and make a reasonable profit charging less than $100
It would depend on the year, make and model vehicle.
How can you unclog your toilet that is clogged with sand i dumped some sand and water keeps overflowing out the bottom?
You can scoop as much as you can, then remove the toilet from the base. Using a shop vac would likely also pull sewer material up, too, so you need to push it through. Most probably the best idea is to hire a plumber to come and clear the problem. ANSWER: You dumped sand down your toilet?!? You deserve to have it clogged....honestly! You also deserve to have to pay for a plumber to come… Read More
In CT USA, a garage would charge 1 hour labor to replace the rear brake pads on that Mountaineer.
well a thermostat is between 5 to 15 dollars and they will charge one gallon of antifreeze (about 9 dollars a gallon) and probabily about an hour of labor. so it kind of depends on how much they charge an hour.
It depends on you mechanic, how much they charge per hour. It might cost you between 350 and 400 on average.
I would expect $100-150.
The last plumber I hired got 65.00 an hour and that has probably gone up since that was 2-3 years ago. I had to replace the pipe in the mainline and the whole job cost me over 2,000. that included the fees to the plumber.
The cost to replace the water shut of valve varies based on if it is to a sink, toilet, hose, or the entire house as well as the type of pipe used. They can range from twenty dollars to around a hundred dollars.
Determine how much you will work for per hour then multiply that times the amount of time it takes you to replace that window.
The average yearly salary for plumbers in 2006 was $45,830.
A plumbers helper makes a decent salary. They start out around 39,000 dollars a year which is what you could expect to get paid with two years experience.
Depending on quality of radiator and charge per hour, I would say $200 at least.