0
25 to 50p depending on your water bill, gas electricity etc
Wiki User
∙ 12y ago
Wiki User
∙ 13y agoAbout 10%-30% Of Water.
Add your answer:
Earn +20 pts
How much water used in a ten minute shower in litres?
Can't say because this depends on the flow coming out of the shower head. If the flow is 1ltr per minute then in 10 minutes you will use 10 litres The average shower in the US flows at a rate of 7.9 liters per minute, or 2.1 gallons per minute. A ten minute shower would consume 79 liters or 21 gallons of water.
How much water does a quick shower use?
depends on how much you want, like i have 700 gallons.
How much does it cost to have a shower for 3 minutes?
It appears from the internet that a 10 min shower = 50p. therefore 17p
How many gallons does a 10 min shower take?
Most newer shower heads restrict water flow to around 3.5 gallons a minute max. . .this would equal around 35 gallons for a 10 minute shower
How much did it cost Amelia for her first 10 minute plane flight?
$1.00
How much does it cost per minute to call from area code 540 to area code 425?
2.5 to 10 cents per minute
How much does a standard oil change at Fas Lube 10 minute oil change cost?
$42.00
ABC Telephone has a special long distance telephone rate The first 10 minutes of a call cost 0.15 per minute Each additional minute is only 0.05 a minute How much would a 35 minute call cost?
2.75 (A+)
How much energy does it take to heat a 10 minute shower?
A ten minute shower can use less water than a full bath. With a new 2.5 gallon-per-minute (low-flow) shower head, a 10-minute shower will use about 25 gallons of water, saving you five gallons of water over a typical bath. A new showerhead also will save energy — up to $145 each year on electricity — beating out both the bath and an old-fashioned showerhead. To avoid moisture problems, control humidity in your bathroom by running your ventilating fan during and 15 minutes after showers and baths.
How much water does a 10 minute shower use in gallons?
25-30 gallons.Depends on the head. Reg. heads about 2.5 per min. x 10 = 25 gal.
How many water do you need to take a ten minute shower?
depends on your shower and shower head. If you are using a standard single shower head, in California the shower heads have regulators installed so they do not allow more than 2 gallons per minute, and some areas that is even reduced to 1.5 gallons per minute.First, you must find the gallons per minute (GPM) of the shower head. (You can request a "flow bag" from your local water agency/supplier) Follow the directions on the bag to measure the gallons per minute. . Most showers range from 2-4gpm. If you know your flow or gpm, then you can simply find how many gallons are used in a 10 minute shower. GPM x minutes. This would be a GREAT exercise for an elementary student since the math is relavent.what if you are 10 and you have to do this for school homework!For those of you who do not wish to measure your shower's gpm, the National Standard in the US is 2.5 gpm, and nearly every shower head available in stores complies with it (though some with a lower flow rate are available).ANS 2 - A 10 minute shower will use 25 -30 gallons of water.Most standard shower heads use 2.5 gallons of water per minute. That would mean in a 10 minute shower, you would use 25 gallons of water. Low-flow shower heads are available to cut down on water consumption and still provide a comfortable shower. There are models available that use 2.0 gallons per minute, and even some that use 1.5 gallons per minute. You can use an internet search to help you find an affordable low-flow shower head so you can do your part in conserving our natural resources.20 -24 gallons.
Obout how many gallons of h20 are used for a 10min shower?
it depends how long u take in the shower kkk
