Approximately 1.5Tons.
More if the Valve assembly and HP Fuel pipes/Distribution block is still attached -usually left on for maintenance.
Under the valve cover at the top right of the injectors for ecah cylinder, need more ask!
Four cylinder, on top of the valve cover. Six cylinder, it is built inside the distributor.Four cylinder, on top of the valve cover. Six cylinder, it is built inside the distributor.
the master cylinder is on top of the clutch pedal, you will need to remove cover above pedals, and you will see the reservoir cap, its not easy to get to or to take off.
There is a cover on the pump that will reveal the pump marks. The engine marks are on the rear housing and flywheel.
how to remove the timing cover for a landrover freelander diesel engine
If its coming from under the chrome cylinder head cover, its the head cover gasket.
Six cylinder, it is a non serviceable component of the distributor.Four cylinder, it is on top of the valve cover.Six cylinder, it is a non serviceable component of the distributor.Four cylinder, it is on top of the valve cover.
Cylinder head cover to cylinder head...torque to 25 Nm (18 ft-lb).
what is the torque specifications for a toyota camry 4-cylinder valve cover
you have to insert a paper clip in the hole on the black cylinder cover and unscrew the cover, good luck
The cylinder head will cover the the puched out hole for the piston and the coolant holes molded in the block and the oil passages.
You dont say petrol or diesel But petrol under plastic cover on the right 32mm filter cover Diesel remove lower engine cover and its in the centre just above the driveshaft 32mm again