Maybe a half hour- it's a pretty easy job, you don't even have to crack a brake line. Just unbolt old one from firewall, unbolt master cylinder, remove vac hose, unhook brake pedal arm from back (usually just a cotter pin) pull master slightly forward to clear piston and lift up. Put piston in new one and pop it in.
how much does a mechanic charge to replace a freeze plug on a chevy el camino 8.0
The cost to charge an air conditioner in a Chevy Silverado 2005 truck, will depend on if it has a R-12 or a R-134a system. The truck should be taken to a mechanic who can charge the AC and who can also given an estimate of the cost.
how do you remove thekeeper that holds booster rod on brake pedal
need to find out how to replace a power brake booster in a 2002 Chevy silverado 2500 HD
The booster is on the driverside fire wall and the MASTER CYLINDER IS BOLTED TO IT.
no...replace as a unit
To remove the brake booster on a Chevy Celebrity: about the same for all years 1. Under the hood take off the 2 nuts that hold the master cylinder to the brake booster. Move the master cylinder out of the way. 2. Detach the vacuum line from the brake booster. 3. Inside the car Remove the under dash panel. 4. Remove the nut that holds the brake rod to the brake pedal, remove the brake rod from the brake pedal. 6. Remove the four nuts that hold the brake booster to the inside firewall. They can be a pain in the neck to get to. 7. Under the hood pull the brake booster out of the firewall. It can be a tight fit by the master cylinder. Reverse the process to install the replacement brake booster.
Yes.
you say alot of prayers!
The power booster check valve would be located where the vacuum hose is connected to the booster. The vacuum hose is connected to the valve and the valve is inserted into the booster. They are usually made of plastic.
At the Chevy garage they insisted on "automotive technicians", but yes. They are all the same name for a mechanic.
how much r134a charge for bus chevy chapion