20 dollars or just go to your local wreckers and get one cheap.
The screw is used to adjust the headlight beam. Pull towards a wall, and you can see the beam projection to set the headlights evenly.
Too the best of my knowledge, no. The 1991 used a sealed beam and the 1997 used a halogen type.
adjust headlight beam on 2010 xtrail
It could be a bad headlight bulb , or fuse # 4 is a 10 amp fuse for the drivers side low beam portion of the headlight
On my 2000 town and country, you pull out the headlight switch, fog lamps only work on low beam On my 2000 town and country, you pull out the headlight switch, fog lamps only work on low beam On my 2000 town and country, you pull out the headlight switch, fog lamps only work on low beam
The 1997 Chevrolet suburban grills are interchangeable. The composite style grill will need some modification as to mounting the grill.
9006 for the low beam 9005 for the high beam
There are three headlight settings on your headlight switch. You can turn the low beam headlights on by turning the headlight switch.
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
The low beam and high beam is the same light bult. Run to walmart and you can pick one up for 8 bucks or so and take it to a car place and they'll probabily switch it out for free
Begin by removing the wiring harness from the back of your 1989 Silverado headlight assembly. Remove the low beam headlight assembly retaining bolts. Reverse the process to install your new low beam headlight.
Take the light assy off and take the bulbs out the back.