answersLogoWhite

0


Best Answer

My quasi-educated guess would be around 7 yards. Depending on the size and style of the chair, it could be as low as 6 yards or as high as 8 yards.

If the fabric has a repeating pattern or the chair has a skirt you may need as much as 11 yards. Take digital pictures of the chair from the front, back and side and measure it height, width and depth. Take the pictures with you when you are looking for upholstery fabric and ask for assistance with the yardage.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

12y ago

While the size of the chair will impact the amount of fabric you need, your local fabric store can provide you with rough estimates for how much fabric you need. The salespeople can also provide you with valuable information about batting, fabric, trim, and padding. Good luck!

Depends, you'll have to measure the chair to figure that one out. Measure the height length, width, the cushions, the wings, etc. If you need to ask that question on here, are you really qualified to reupholster the chair?

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

i work at an upholstry fabric store and we send out probably 5 items a day to be reupholstered, our main sources say around $250 for labor on a wing back chair, and around 6 yrs of your own fabric. this depends on fabric repeat and skirt, no skirt, piping, ect. but generally $250 plus cost of fabric that you pick

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

see: http://www.mormonchic.com/crafty/wingback.asp

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

you will need about 6 yrds

This answer is:
User Avatar

User Avatar

Anonymous

Lvl 1
3y ago

A table chair

This answer is:
User Avatar

User Avatar

Anonymous

Lvl 1
3y ago

One chair

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much fabric is required to upholster a wing back recliner?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can you upholster in any fabric?

It depends largely on the project, but if, for example, you wanted to cover a chair with a light cotton fabric, you would definitely want to back it with some heavyweight iron-on interfacing to strengthen it. Hope this helps.


How do you upholster the inside curve of wooden chair back with no batting and without the fabric ballooning?

I feel that spray adhesive might be your best bet. However, it may stain your fabric through to the outside. Use a test piece before applying to the actual furniture.


What is the best type of recliner if you have back trouble?

I think that a LayZBoy is the best recliner for people with back trouble because it is very well built and has great support.


How to Upholster a Chair?

There are several ways for the non-professional upholster to ‘cheat’ if you will, when it comes to upholstery. It can be a very time consuming task, and a certain level of practical skill and manual dexterity is required. So, this is why many people will take shortcuts when it comes to redecorating old furniture. • First find a chair that has some unattractive upholstery that is definitely in need of a make-over. • Dismantle the chair into separate parts, this will enable you to get a good look at what work is required and take some measurements of the amount of fabric required. • Visit your local fabric store, find a design that’s appealing to you and will fit in well with your interior décor. Hand over the measurements you made earlier to the sales assistant. They will then cut the length of the fabric off. • Now go back to the chair and make sure the fabric has been stripped off. We would recommend you draw a plan of the chair before you start to attach the new fabric onto the chair, make sure you include all parts of the chair that’s going to be covered – including the back and front arms • Make sure you use what is termed within the industry as a “stretcher”- basically, this is scrap material which is sewn to the bottom of the fabric pieces and aids you in getting a better cut. • Finally when you’ve cut out the new fabric you’re going to put on the chair, make sure it’s as taught as possible, and then before securing it ensure any staples or tacks are going to be covered up by the panels. This goes to show amateurs can upholster their furniture, but for more complex items of furniture that require greater skill and precision it’s always best to enlist the help of professionals.


To disassemble a lazyboy recliner couch for moving and you forgot how to do this?

The backs should come off by lifting them straight up. You may have to push in on each side where the hinges attach. The fabric may have a flap that covers the hinge on the side of the back.


What are some health benefits of a recliner lift chair?

The main benefit of a recliner lift chair is the ease and boost to one's back and particularly, the lower back. One can recline for hours after a hard day at work, or even after a good meal.


Where can you get replacement parts for a Bradington Young recliner?

I have a customer that brought in a older bradington young recliner . It has a hydrolic sylinder that lets the back down and its bad . It has no numbers on the chair . Could i get a new cylinder for it and how?


What is the bike called that you sit back on and it has handles by your waist and the pedals going upward?

the recliner bike


An Office Chair Recliner Lets You Relax?

Finding time to take a break when you work at home is a difficult proposition. Consider an office chair recliner that will at least let you sit back and close your eyes for a bit.


Affordable Ways to Decorate a Back Chair ?

A back chair looks great in any room of a home. Whether one wants to add a back chair to a family room, living room, den, office, or kitchen, there are plenty of areas that look great with a back chair. The only problem is that back chairs can often be very expensive to purchase. In addition, buying a back chair at a designer furniture store can be even more expensive. This article will discuss many affordable ways to decorate a back chair and make it appear to be a designer piece of furniture. One great way to decorate back chair is to upholster it with cool material. It can be a fun idea to go to a fabric store and pick out a luxurious fabric to decorate a chair with. One great fabric to decorate a chair with is velvet. Velvet always looks stunning on any chair. Velvet chairs look great in formal dining rooms, especially when paired with a glass table. It is a great idea to invest in some velvet fabric to upholster a chair with. It is also a cool idea to spray paint a chair, especially if it is made out of wood. Many wood chairs are made out of wood that gets rugged or worn out. It is a good idea to spray paint a wooden chair with white or black spray paint. This sort of pain makes a chair look sophisticated and chic. A very cool idea for a back chair is to upholster it with velvet and to spray paint it with white spray paint. This look can be stunning in any sort of home. Another great idea for finding affordable back chairs is to scour flea markets or antique shows for back chairs. These sorts of places are always selling all sorts of back chairs from different eras. A person can find virtually any sort of back chair from any time period at a flea market or antique show. Overall, there are many creative ways to decorate a back chair and make it look great for any home. All it takes is a little creativity and determination to make a chair look fabulous!


What is the name for an armchair which has a back that can be adjusted to slope at various angles?

A recliner. Often called by the brand name "La-Z-Boy".


What is a wall away recliner?

A wall-away recliner is one that allows the recliner to be close to the wall (3") when upright and will STILL be only 3" from the wall when fully reclined. Most recliners extend backward, waw recliners move forward into the room. Most recliners retain the "chair-like" 90 degree position which rocks back intact whereas waws split at the back-seat intersection to lay flat. Wall-aways save lots of space.