The highest I have seen is 210 hp if it is bone stock prob more like 190-200. and that is if the engine was not beat to death and cared for.
500 horsepower, 670 with the brand sticker on the fender
Upgrade the intake, exhaust, and fuel injectors.
Add a free flow exhaust and a cold air intake free flow air filter. This will give you slightly more h.p. To get some real horsepower you can install a turbo charger or supercharger but they are expensive.
A intake valve open when the piston reaches the top of the cylinder and just after the exhaust valve closes. It allow fuel and air to enter the engine cylinder.
During the intake stroke of each cylinder.
there are 8 intake valves in that engine. They are located in the cylinder head, 2 per cylinder.
Type your answer here... They are in the cylinder head.
A 4-cycle engine that has the intake and exhaust valves located in the cylinder head.
In the cylinder heads.
if you follow the air intake box it attaches to it and its usually in the front part of the engine.
The intake gasket is the gasket that conncects from your air filter into your intake manifold
On the six cylinder it is on the passenger side of the engine. On the eight cylinder it is behind the intake manifold on the back of the engine.