Want this question answered?
Yamaha sniper cost around usd$1900you can check at http://www.YamahaT135.COM for details
85ml
First locate the air intake cowling to the right of the engine block. This is where the air enters from the large hose in the front down into the engine. Around this large cowling are five captive screws. Unscrew these (don't worry, they won't fall out). Now, there is a small hose directly connecting the top of the cowling to the right side of the engine block. Carefully wiggle the cowling up and to the right so this hose disconnects. Once it does, you can pivot the cowling straight up. The intake hose is ribbed to allow it to move in such a manner. Be careful; there are two small airflow hoses attached to the cowling near the bottom where the intake hose attaches. Don't bend the cowling up so much that these pop off. Change the air filter. Be sure to press the new one down firmly so that the rubber grommet on it engages the intake firmly. Replace the cowling, reattaching the hose at the top. Once the cowling is back in place, secure the five captive screws. That's it; you're done!
Type your answer here... too much
how much oil does an yamaha xt500 take
qt fork oil and type oil for the front fork on each side
Each front fork holds: 400cm3 or 14.1 oz or 13.5 US oz.
How much oil does a 2001 Yamaha TTR 125 hold? How much oil does a 2001 Yamaha TTR 125 hold? How much oil does a 2001 Yamaha TTR 125 hold?
The Yamaha bravo is 18 horsepower.
How much horsepower does a stock 2006 Yamaha raptor have?"
There are many T68 "sniper" models. most of them are 500+ dollars.
i leave in ilreland and a l96 airsoft sniper will cost you $400