1.7 quarts
IV been working on it right now all you need to do is take the back axle off and get a bearing puller and pull the outer bearings off and then you can slide the axle out and put your new bearings in
The answer is no it won't fit. You need an air intake box from a 1986-1989 Accord.
if the spark plug always need to be replaced
Check the drivers manual, it will have that info.
njchfvuidhfvucxhjkjcvchdvhfxik
You will need to remove the tire and wheel from your 1986 Honda Accord. Remove the brake caliper and the brake spring. The disk brakes will come off. Reverse the process to install the new front disc brakes.
Honda K2400HH pressure washer pump how much oil do you need to put back in
2.54 quarts
4 quarts
I hate to pop the bubble, but if you have to ask, you should not proceed. The Honda will often smoke out the cam bearings and the head could need replaced. Consult a professional.
they might need a little modification, but probably not much.
Call whoever is doing the work and ask them! If it's you doing the work, call the parts store and find out how much the parts are! Pads only? Less than $25. Do you need calipers? Hoses?