actualy i belive may be 120 Ltr if the car is 6 Cylender
Regardless of the block, you have to use Vortec heads to use a Vortec intake.
5W30 weight only. Gastroll GTX and Kendell brands are a real good oil to use.
The factory saids to use 5W30 Weight ONLY. Kendell, Gastrol GTX. Is a real good brand of oil to use.
5W30 in the cold months and 10W30 in the hot months. If you use any heavier oil then the valvetrain will not lube and will burn up.
On this engine I recommend you use an AC/Delco filter.
You can put the Vortec in it if you have the wiring and ecm to run it. or you could use the Vortec heads and an aftermarket intake and really wake up your engine. The vortecs use a roller cam.
15/50 summertime 10/40 winter
If you attempt to put a vortec engine into a vehicle with a NON-vortec computer, you'll have more problems than you care to deal with.
89 OCTANE
Use so much what? Oil?
The word 'vortec' is the name of the cylinder heads used in Vortec Model engines in the year 96'+ The engines that use the Vortec cylinder heads are the 4.3L Vortec, 5.0L Vortec, 5.7L Vortec, and 8.1L Vortec. They were only put on Gen I small blocks. If they are any other size Chevy engines and still retain the Vortec name then it's purely a marketing name, the same goes is it is later than a Gen I engine. For example the new 4.2L I6 from GM retains the name Vortec, but it does not actually use Vortec heads as these heads were only made for OHV engines, and the I6 is an OHC engine. The Vortec heads are based on the LT1 and LT4 head after they were discontinued along with their reverse flow cooling design. It is simply an effect made in the head similar to a vortex to better atomize the fuel and air intake charge when entering the combustion chamber, it is not a different type of motor.
The word 'vortec' is the name of the cylinder heads used in Vortec Model engines in the year 96'+ The engines that use the Vortec cylinder heads are the 4.3L Vortec, 5.0L Vortec, 5.7L Vortec, and 8.1L Vortec. They were only put on Gen I small blocks. If they are any other size Chevy engines and still retain the Vortec name then it's purely a marketing name, the same goes is it is later than a Gen I engine. For example the new 4.2L I6 from GM retains the name Vortec, but it does not actually use Vortec heads as these heads were only made for OHV engines, and the I6 is an OHC engine. The Vortec heads are based on the LT1 and LT4 head after they were discontinued along with their reverse flow cooling design. It is simply an effect made in the head similar to a vortex to better atomize the fuel and air intake charge when entering the combustion chamber, it is not a different type of motor.