Want this question answered?
Power can be found by the following equations depending upon what information you have available. Power = Voltage x Current ; P=VI Power = Current Squared x Resistance ; P=I2R Power = Voltage Squared / Resistance ; P=V2/R
Power=current squared times resistance
I never measured the resistance of an electric iron, but: the 15 ohm resistance is probably required to develop a required 806 watts of power. Using Ohm's law, I(current) = E(voltage)/R(resistance), therefore I(current) =110 volts/15 ohms = 7.33 Amps (current), and, Power (watts) = E(voltage) X I(current); 110 volts X 7.33 amps = 806 watts. The iron requires that wattage to develop enough heat in the sole of the iron. Hope this helps.
Power = (current) times (voltage)Current = (Power) divided by (voltage)Voltage = (Power) divided by (current)
Power FET
if the resistance is decreased and the current stays the same, then the power decreases.
Ohm's law: Voltage = Current times Resistance Solve: Resistance = Voltage divided by Current So, a device drawing 50ma with 150V has a resistance of 150 / 0.05, or 3000 ohms. p.s. Since power is volts times amps, that device is dissipating 7.5 watts.
electromotive force, current, resistance, and power
The power dissipated by a resistance 'R' carrying a current 'I' is [ I2R ]. The power is dissipated as heat, and you can see from [ I2R ] that for a given current, it's directly proportional to 'R'.
The power dissipated across a resistor, or any device for that matter, is watts, or voltage times current. If you don't know one of voltage or current, you can calculate it from Ohm's law: voltage equals resistance times current. So; if you know voltage and current, power is voltage times current; if you know voltage and resistance, watts is voltage squared divided by resistance; and if you know current and resistance, watts is current squared times resistance.
Electric power is not defined as current divided by voltage. Electric power (Watts) is equal to amps times voltage
Power can be found by the following equations depending upon what information you have available. Power = Voltage x Current ; P=VI Power = Current Squared x Resistance ; P=I2R Power = Voltage Squared / Resistance ; P=V2/R
Power can be found by the following equations depending upon what information you have available. Power = Voltage x Current ; P=VI Power = Current Squared x Resistance ; P=I2R Power = Voltage Squared / Resistance ; P=V2/R
Wattage or power rating of a product can be calculated by multiplying voltage rating and current rating. (Power = Voltage x Current). e.g. if device is working at 12V and 2A is the current rating. It is 24Watt. Since Voltage = Current x Resistance , for a resistive load power can also be calculated by Power = Current x Current x Resistance = I^2 x R = I square R
Power is inversely proportional to resistance. Ohm's law: Current is voltage divided by resistance Power law: Power is voltage times current, therefore power is voltage squared divided by resistance.
Nothing can change electric current to voltage. You can compare "current " to rate of flow, while "voltage" is the energy level. Transformers can be used to increase or decrease the voltages of alternating current as is done from 'street power' to domestic power.
The amount of electric energy that is converted into thermal energy increases as the resistance of wire increases. As the resistance in the current increases, the current in the circuit decreases.