Want this question answered?
If you are asking about compression numbers, they should be around 150psi.
To much base timing or cam/crank timing. Spark plugs,spark plug wire,ignition coils,coil on plug(COP). Fuel pressure/delivery. Contaminated fuel.
it could be a bad spark plug wire or the plug could be gapped to much
No it is probably ur spark plugs or spark plug wires, that electric distributor or coil No it is probably ur spark plugs or spark plug wires, that electric distributor or coil
Don't know much about lawnmowers but I work on cars. So either ur threads in the head are stripped and/or ur exhaust system is clogged, making the pressure come out of the weakest area which in your case is the spark plug hole
In order to change the spark plug wires in a Toro lawn mower, the engine housing should be removed. The spark plug wire will then be disconnected which is a simple twisting movement under pressure. This is a very quick procedure.
A bad spark plug, spark plug wire, distributor cap, rotor, fuel injector, fuel pressure regulator, incorrect fuel pressure, dirty fuel filter, contaminated fuel (water),
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
Yes
as much as needed
Spark plug wire not connected to spark plug? Spark plug wire connected to Wrong spark plug? Vacuum line disconnected? Bad spark plug or wire?
To change the spark plugs in a Chevy Celebrity: 1. Give the spark plug boot a twist to free it up from the spark plug, then pull on the boot to remove the spark plug wire from the spark plug. 2. Use a 5/8" spark plug socket with an extension and ratchet or breaker bar to loosen then remove the spark plug. 3. Set the gap on the new plug to .045" then screw it back into the spark plug hole in the head. Tighten the spark plug and replace the spark plug wire. I change the spark plugs one at a time to keep from getting the spark plug wires on the wrong spark plug.