2000 Psi
The fittings THREADED are normally rated for 125 PSI but there are ratings over 3,000 PSI if needed such as high pressure steam applications Then one has to take temperature /pressure relationship into consideration higher temperature greater pressure
up to 2.300 PSI
A pressure rating refers to the qualified operating pressure that is recommended for a component or a system by the manufacturer. The pressure rating of 12 schedule 40 steel pipe is 370 psi.
A lot
2000 Psi
Depends on what is flowing through the pipe and the temperature of the pipe.
A good number to use is 30,000,000 psi (207 GPa)
The fittings THREADED are normally rated for 125 PSI but there are ratings over 3,000 PSI if needed such as high pressure steam applications Then one has to take temperature /pressure relationship into consideration higher temperature greater pressure
up to 2.300 PSI
A pressure rating refers to the qualified operating pressure that is recommended for a component or a system by the manufacturer. The pressure rating of 12 schedule 40 steel pipe is 370 psi.
A lot
Schedule 40 welded carbon steel pipe (black) is rated at a working pressure of 150 psi. It should be printed on it. Schedule 80 welded is rated at 300 psi. If U want higher rated piping you must use seamless (not welded) pipe. Hope this helps!
49.334 psi is the pressure loss and to get the friction loss you would need to know the smoothness of the inside of the pipe.
First you need the size of the pipe and the volume of water supply. Pressure will vary during usage. Standard well system operates between 20-40 psi and city systems operate from 50-70 psi.
Steel has a crush strength of 95,000 psi and a tensile strength of 55,000 psi. A Sch. 80 - 4" steel pipe has a cross-sectional area (of steel) of 4.407 sq. in. This can handle a load in tension of ~242,000 pounds before failure. And a load in compression of ~ 418,000 pounds before failure. 50,000 pounds is well within the factor of safety for both loads in tension or in compression, provided there are no shear forces applied.
160 psi of nitrogen in the rear shock.