0
How much resistance must be connected in series with a 250 ohms inductive reactance to produce a total ciruit impedance of 400 ohms?
Wiki User
∙ 17y ago
how much resistance must be connected in series with a 250 ohms inductive reactance to produce a total ciruit impedance of 400 ohms?
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
An opposition to current flow that occurs in alternating current circuits is called?
Capacitive reactance.
When are voltage and current out of phase?
Because the impedance of the inductor and capacitor is not a real resistance / has an imaginary value that causes voltage and current to be out of phase. An inductor's impedance is equivalent to j*w*L (j = i = imaginary number, w = frequency in radians, L = inductance), while a capacitor's impedance is 1/ (j*w*C). The 'j' causes the phase shift.
What are the Practical Applications of Inductive Reactance?
Radio, t.v., cellphones etc.
Why neutral of generator is resistance grounded and neutral of motor is reactance grounded?
You can use resistance or reactance grounding on generators and motors. My understanding is resistance grounding is often used to limit ground fault currents to a few amperes, while reactance grounding will limit fault current to less than the three phase fault current. If reactance grounding is used to limit fault current o very little (like resistance grounding), transient overvoltage problems can occur.
What is the advantage of using isolation transformer in a 220 volt 2wire AC system before load?
The isolation transformer provides a electrical mean to separate the source and load. Also, The isolation transformer will protect against surges and spikes as the primary winding due to it's magnetic property will impose more resistance (reactance) to higher frequencies such as spikes and such. where Xl is the impedance (resistance) of the primary winding. In this equation, one can see that higher frequencies increast the impedance of the coil proportionally to the rate of frequency.
When a series circuit containing resistance and inductive reactance is connected to a ac supply the current will?
The load current will lag the supply voltage by an angle called a 'phase angle', determined by the values of resistance and inductive reactance. The magnitude of the load current will be determined by the impedance of the circuit, which is the vector sum of the resistance and inductive reactance.
What are the three types of opposition to current flow that impedance represents?
There is pure resistance, inductive reactance, and capacitive reactance.
What is the formula for inductive reactance in a circuit with a capacitor inductor and a resistor in a AC circuit?
to determine the total resistance, you add them vectorilly,first find the inductive reactance of the inductor by the following formula: 2 pi F L (2x3.14 x frequency in herts x inductance in henrys) next, consider the inductive reactance and the resistance as the two sides of a right triangle and the hippotanus would be the total impedance.(this combined ''resistance'' is called impedance.) to determine the total resistance, you add them vectorilly,first find the inductive reactance of the inductor by the following formula: 2 pi F L (2x3.14 x frequency in herts x inductance in henrys) next, consider the inductive reactance and the resistance as the two sides of a right triangle and the hippotanus would be the total impedance.(this combined ''resistance'' is called impedance.)
What is impedance diagram?
An impedance diagram (sometimes called an impedance triangle) results when a series circuit's voltage phasor diagram is divided throughout by its reference phase (current) -this results in resistance (=VR/I), inductive reactance (=VL/I), capacitive reactance (=VC/I) and impedance (=V/I) andillustrates the Pythagorean relationship between the circuit's impedance, reactance, and resistance.
Does the impedance of an RL series circuit varies inversely with the frequency?
The simple answer is no. The impedance of an R-Lcircuit is the vector sum of the circuit's resistance and its inductive reactance. Resistance is determined by the length, cross-sectional area, and resistivity of the conductor (although its 'a.c. resistance' is proportional to the frequency squared), whereas the inductive reactance is directly proportional to the frequency of the supply.
An inductor has an inductive reactance of 64ohm's and a wire resistance of 36ohm's what is the impedance of the inductor?
Impedance is a vector sum using the formula Z = square root (XL2 + R2); where Z = impedance, XL = inductive reactance, and R = resistance. Therefor the formula for a circuit where XL = 64ohm's and R = 36ohm's is Z = square root(642 + 322); Z = 71.6ohms.
When a resistive AC circuit contains inductance the total opposition to current flow is called?
The resistance of an a.c. load is called 'resistance' (R). Resistance is not affected by frequency, only by the cross-sectional area, length, and resistivity of the conductor. Having said that, because of the skin effect, which causes an a.c. current to flow closer to the surface of the conductor, the effective cross-sectional are is reduced, so the value of a.c resistance is somewhat higher than the d.c. resistance -this difference increases with frequency.The opposition to a.c due to inductive or capacitive loads is called reactance (inductive reactance or capacitive reactance), and the overall opposition to a.c. current is the vector sum of resistance and reactance, and is called impedance. That is:(impedance)2 = (resistance)2 + (reactance)2
Why is there no inductive reactance in DC circuits?
Inductive reactance is a resistance by inductors to the change of current flow, and is dependent on the frequency at which the current oscillates. DC current flows in only one direction so an inductor's impedance remains the same.
What the magnitude of the impedance of a series AC circuit w resistance of 6 Ω an inductive reactance of 17 Ω and zero capacitive reactance?
Since inductive reactance is 90° out of phase from pure resistance, this can be calculated like the hypotenuse of a right triangle. Sqrt( 172 + 62) = 18.028 Ω The angle is 70.6° lagging.
Short definition of impedance in connection with ac?
Impedance in an AC circuit is like resistance. In fact, impedance is measured in ohms, just like resistance. Impedance takes into account the fact that current and voltage are often not in phase with each other due to capacitive and inductive reactance.
What is the opposition to the current flow?
resistance is the opposition to the flow of electric charge
What is working principle of inductor?
A changing current through an inductor induces a voltage into the inductor, the direction of which always opposes the change in that current.So, in a d.c. circuit, an inductor will oppose (not prevent) any rise or fall in current, although the magnitude of that current will be determined by the resistance of that inductor, not by its inductance.In an a.c. circuit, because the current is continuously changing both in magnitude and in direction, it acts to continuously oppose the current due to its inductive reactance. Inductive reactance is proportional to the inductance of the inductor and the frequency of the supply. The vector sum of the inductive reactance of the inductor and the resistance of the inductor, is termed the impedance of the inductor. Inductive reactance, resistance, and impedance are each measured in ohms.
