There are many gaskets in many different vehicles. More info needed.
don't fix it!.. buy new head gasket is much better. In valve cover, just put gasket maker or silicon gasket maker.
Put the gasket on the new window. Put a small diameter rope or cord in the channel with a foot or two extra to pull on later. Put window in the opening on the outside of car. Have someone hold window firmly in place. Pull on the cord from inside the car and work the gasket into place. It helps to put powder or wd-40 on gasket to make it slip into place easier.
to change the gaket youl have to drain all the oil out and change your oil fluid filter and gasket the gasket is the seal between your pan and car take pan off drain clean and put new gasket on pan and put it back on.
Do it yourself its easy. Put the front of your car on some car ramps, drain the oil, and take the whole pain off, take all the screws out and out comes the pain. Clean it with some kind of cleaner, for example carbuerator cleaner, where the gasket goes, let it dry and install the new gasket.
you have put a new head gasket on it.
Coolant getting into a combustion chamber. Probably a bad head gasket or intake manifold gasket.
Can do put you car????? Put in car do you can??????
You can change the head gasket by removing the valve cover. Remove the gasket and clean the gasket surface. Put the new head gasket on the cleaned surface.
Only if it is damaged.
Your question is REALLY vague. There are a number of gaskets on a car ,so you need to be very specific. Is it a head gasket,valve cover gasket,water pump gasket etc....
for my 99 camaro, i had to find it first, then i took the belt off, then i took the bolts off and got a razor, and scraped the old water pump gasket off the water pump, then i put silicone gasket maker on my water gasket and put that on the water pump that is attatched to your engine, then i put silicone gasket maker on the new water pump and then i stuck that on the other half of the water pump and bolted it back on, lol i figuered it out by myself and im 16 and that is the first time i worked on my car, hoped that helped
follow the upper radiater hose to the top of the motor remove the housing and take out the thermostat be sure and remove all the gasket material clean and dry the housing and the area where the thermostat goes put on the new gasket and thermostat making sure not to put it in upside down good luck